Publicité
Les langues disponibles
Les langues disponibles
4. To use a sensor dry cycle
• Select a Manual Dry Cycle.
• Press MORE TIME or LESS TIME until the
desired drying time is displayed.
Tap MORE TIME
or LESS TIME and the time will change by 1
minute interval.
The MORETIME or LESS TIME feature can be used
with Manual Dry, Time Dry and Rack Dry Cycles.
• Press TEMP. CONTROL
until the desired
temperature
indicator
glows.
• (OPTIONAL
STEP) If desired,
select OPTIONS.
For more details, see Options.
• Press START/PAUSE.
Be sure the door is closed.
• If you do not press START/PAUSE
within 10
minutes of selecting
the cycle, the dryer
automatically
shuts off.
• If you wish to end your drying cycle after pressing
START/PAUSE,
press START/PAUSE
again.
To stop your dryer
at any time
Press START/PAUSE
or open the door.
5. Pausing or restarting
To oause the dryer at
any time
Open the door or press START/PAUSE
once.
To restart the dryer
Close the door. Press START/PAUSE.
Drying will continue from where the cycle
was interrupted if you close the door and press
STARTwithin 10 minutes. If the cycle is
interrupted for more than 10 minutes, the dryer
will shut off. Select new cycle settings before
restarting the dryer.
A
WARNING#
Improper w_re connection or related wiring error
will can cause fire or electric shock or death.
1.Open the door
and pull the filter
straight
up
gll Clean the door and its opening
,
1. Wipe out the door
opening.
Otherwise,
build-ups
of dirty and
foreign objects
will
damage
sealing
of
door.
2. Clean the transparent
glass door to keep
inside view clear
through
the glass.
2.Clean the filter using one of following ways in cases.
Run the fingers
across the filter
_) Vacuum
the lint filter
@ Wash the lint
screen
in warm,
soapy water.
Dry thoroughly
and
replace.
2%
Publicité
