Beamz 154.029B Manuel D'instructions page 5

OPERATION
The unit has two operation modes, DMX or Auto mode.
AUTO MODE
The unit has 16 inner programmes. You can set the speed of the programmes.
1. Connect lights.
2. Press "MODE", select P (programm)
3. Press "UP" or "DOWN", select programm P1 – P16
4. Press "MENU", select Sp (speed)
5. Press "UP" or "DOWN", select speed SP01 – SP99, 01 for the 30sec step and 99 for the fastest 10 steps per second.
DMX MODE
The unit can set to 1 channel, 2 channel or 4 channel DMX.
1. Connect the unit to a DMX controller
2. Press "MODE", select A (adress)
3. Press "UP' or "DOWN" to select the DMX start-adress 001-512
4. Press "MENU", select CH (channel)
5. Press "UP" or "DOWN", to select 1, 2 or 4 CH DMX
CH1 means all the units outputs receive the selected DMX value.
CH2 means unit is in 2 channel mode. CH1 and CH2 are one DMX channel. CH3 and CH4 are second DMX
channel.
CH4 means unit is in 4 channel mode. All 4 outputs have there own DMX channel
6. DMX value of switching. 0 to 127 is Off, 128 to 255 is On.
5