Publicité
Les langues disponibles
Les langues disponibles
6. Installation of the appliance
•
This appliance is not intended for use as a
built-in refrigerator.
•
Use the front adjusting legs to level the
appliance. If the appliance is not level, it
may affect the performance of the gasket
seal or even lead to a failure of your
appliance.
•
It must be possible to disconnect the
appliance from the mains power supply.
The plug must therefore be easily accessible
after installation.
•
Place the appliance on a firm and flat
surface (floor) so that it is stable, otherwise
vibrations and noise may occur. When
placing the refrigerator on floor coverings
such as carpets, straw mats or polyvinyl
chloride (PVC), place a solid sheet or cover
under the appliance to prevent colour
change due to heat dissipation.
•
Before plugging in the power cable, check
that the voltage and frequency of the type
plate match your power supply network.
The appliance must be earthed. The
power cable is supplied with a contact for
this purpose. If the socket is not earthed,
connect the appliance to a separate earth
according to current regulations and consult a
qualified electrician.
41
Publicité
