Napoleon Haliburton GS28N Manuel D'installation Et D'utilisation page 27

6.2 door closing and opening
WARNING
!
• Glass may be hot. Do not touch glass until cooled.
• If equipped with door latches that are part of a safety system, they must be properly engaged. Do not
operate the appliance with latches disengaged.
• Before door is removed, turn the appliance off and wait until appliance is cool to the touch. Doors are heavy
and fragile so handle with care.
When installing the fi re viewing door, a simple procedure must be followed in order to not damage the door.
A.
Open both side doors, exposing the bushings on the left and the latches on the right.
B.
Align the pins on the door to the bushings. Lower into place until both bushings touch.
C.
Engage the latch hooks into the door frame. Snap the rear handle hook to lock the latch closed.
note:
It may be necessary to lift the door when securing it to ensure that it is in a horizontal position.
To open the door, repeat in reverse order.
BUSHING
HINGE PIN
CATCH SLOT
fi nishing
DOOR
LATCH
W415-1426 / D / 05.22.19
EN
27