Makita LC02 Manuel D'instructions page 8

Corner nozzle +Extension wand (Straight pipe)
In tight quarters where the cleaner itself cannot squeeze
in, or in high places hard to reach, use this arrangement.
3
2
011524
MAINTENANCE
CAUTION:
Always be sure that the tool is switched off before
•
attempting to perform inspection or maintenance.
After use
011532
When storing the cleaner, hang it from a nail using the
hand strap.
NOTE:
Putting the cleaner against the wall without any
•
other support cause the cleaner to fall down and be
damaged.
011567
All manuals and user guides at all-guides.com
1. Cleaner
2. Extension wand
3. Corner nozzle
1
8
Cleaning
011533
From time to time wipe off the outside (cleaner body) of
the cleaner using a cloth dampened in soapy water.
Clean out also the suction opening, dust bag/dust pack
mounting area and the dust stopper.
CAUTION:
Never use gasoline, benzine, thinner, alcohol or the
•
like. Discoloration, deformation or cracks may
result.
008934
Wash the dust bag in soapy water when it is clogged with
dust and the cleaner power becomes small. Dry it out
thoroughly before use. An insufficiently dried bag may
cause poor suction and shorten the service life of the
motor.
NOTE:
Dust pack is a throw-away type.
•
When the sponge filter is clogged with dust, remove it
from the cleaner and then wipe it off or wash in water.