G Operating instruction
Controls and Displays
A Base station
1.
Time
2.
Room temperature
3.
Day of the week + date + calendar month DCF
signal radio symbol
4.
Room humidity
5.
Outdoor temperature/outdoor humidity channel 1
(CH1), low battery level display for measuring
station 1
6.
Outdoor temperature/outdoor humidity channel 2
(CH2), low battery level display for measuring
station 2
7.
Outdoor temperature/outdoor humidity channel 3
(CH3), low battery level display for measuring
station 3
8.
ALARM button = displaying/setting/deactivating/
activating the alarm functions
9.
CH button = manual search for a signal from the
measuring station/channel selection
10.
SNZ/LIGHT button = temporarily interrupts the
alarm (snooze)/activates the backlight
11.
SET button = settings/confirms the setting
12.
UP button = increases the current set value/recalls
the saved maximum/minimum values (MAX/MIN)
13.
Down button = decreases the current set value/
toggles between °C and °F / activates/deactivates
manual DCF radio signal reception
14. + 16. Fold-out bases
15.
Battery compartment
B Measuring station
17.
Transmission indicator light
18.
TX button = manual connection to the base
station
19.
Recess for wall mounting
20.
Slide switch = selects channel 1, 2 or 3
21.
Battery compartment
2
Thank you for choosing a Hama product.
Take your time and read the following instructions and
information completely. Please keep these instructions in a
safe place for future reference. If you sell the device, please
pass these operating instructions on to the new owner.
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or to
draw your attention to specific hazards and risks.
Note
This symbol is used to indicate additional information or
important notes.
2. Package Contents
• Trio weather station (base station for indoors)
• 3 measuring stations for outdoors
• 3 AAA batteries
• 6 AA batteries
• These operating instructions
3. Safety Notes
• The product is intended for private, non-commercial use
only.
• Do not operate the product outside the power limits given
in the specifications.
• Do not use the product in moist environments and avoid
splashes.
• Do not use the product in the immediate vicinity of heaters
or other heat sources or in direct sunlight.
• Do not use the product in areas where the use of electronic
devices is not permitted.
• Do not place the product near interference fields, metal
frames, computers, TVs, etc. Electronic devices and window
frames can negatively affect the product's functionality.
• Do not drop the product and do not expose it to any major
shocks.