Publicité
Les langues disponibles
Les langues disponibles
INSTRUCTIONS
.1
.2
.3
Miter-It™ V2
Determine how many jigs are needed.
Typically, one every 2 to 4 feet is sufficient,
but more may be used for extra long or
heavy aprons.
Ensure the material surface is clean.
Apply adhesive.
Place Miter-It on top piece, carefully
ensuring the leg is in contact with the
mitered edge.
Hold the adjustment knob and depress
the release lever to lower the lift wedge.
(see fig. 1)
Turn the adjustment knob counter-
clockwise to ensure lift wedge is fully
lowered. (see fig. 2)
Insert mitered apron piece. (see fig. 3)
6
Publicité
