Publicité
Les langues disponibles
Les langues disponibles
SAFETY
Failure to follow Safety, Maintenance, and Instructions
may result in product failure, serious injury, and/or
property damage.
Caution
Miter-It's are easy-to-use jigs; they are not designed
for exerting high clamping pressure. Do not over-
tighten; additional pinch-force can be applied with
tape as needed.
Pieces must be cut at a standard 45° angle for use
with the Miter-It.
Use care when placing the Miter-It jig on the material,
as the 45° edge can be fragile.
Miter-It™ V2
2
Publicité
