Télécharger Imprimer la page

VITO PRO POWER VIASL75 Mode D'emploi page 28

Publicité

Les langues disponibles

Les langues disponibles

Whenever the tank is full, stop the vacuum cleaner and
empty.
When vacuuming dust or solid waste:
1. Switch off the vacuum cleaner;
2. Undo the fastening latches (6) and remove the vacuum
cleaner head (7);
3. Remove the filter;
4. Hold the waste tank handle (16) and turn it over the
foldable waste tank's holder (19);
5. Pour the tank waste into a bag or box for disposal;
6. Once empty, place the tank on a vertical position and
also the filter bag;
7. Refit the vacuum cleaner head and switch it on again.
When vacuuming liquids:
1. Switch off the vacuum cleaner;
2. Undo the fastening latches (6) and remove the vacuum
cleaner head (7);
3. Remove the liquid drain hose (5) and remove the cover;
4. Empty the waste into a container;
5. Refit the vacuum cleaner head and switch it on again.
Before performing cleaning and maintenance work, switch
the appliance off and unplug the power cord.
When the filter is dirty, the suction power decreases
considerably. Clean the filter regularly to increase its
efficiency and extend the vacuum cleaner service life. Never
operate the vacuum cleaner without a filter installed.
The "ON/OFF" buttons are protected by a waterproof cover.
If the cover is damaged, replace it with a new one.
1. Undo the fastening latches (6) and remove the vacuum
cleaner head (7);
2. Unscrew the filter fixing accessory, counter clockwise;
3. Remove the filter, rinse with water until clean and let it
dry;
4. Refit the filter and assemble the other components in
the reverse order of disassembly. The filter must be
placed dry.
1. Undo the fastening latches (6) and remove the vacuum
cleaner head (7);
2. Check the condition of the filter bag. If it is very dirty,
wash it with water and let it dry;
3. When the filter is completely dry, fit it and the vacuum
cleaner head.
Cleaning
After each use, clean all the components of the wet and dry
vacuum cleaner. Clean the vacuum cleaner with a clean,
damp cloth blow it out with compressed air at low pressure.
Careful handling protects the power tool and extends its
service life.
Cleaning and storage
Store the vacuum cleaner in its original packaging in a
clean, dry place out of children's reach.
The ideal storage temperature is between 5 and 30˚ C.
Store the cleaner in its original packaging.

Publicité

loading