Specifications; Warranty - PRO-PULSE 59595015 Manuel De L'utilisateur

MAINTENANCE
This chainsaw meets all current legislation requirements. In order to
avoid injuries while repairing; every repair has to be done by qualified
staff in an authorized service centre.
CHAIN SHARPENING
1) Disconnect the cord from the mains supply.
2) Wear protective gloves.
3) Ensure the chain is correctly tensioned and not loose.
4) Engage the chain brake (6) to block the chain on the bar when sharpening.
5) Use a round file for chain sharpening, diameter equivalent to 1.1 times the
cutting tooth depth.
6) File at a horizontal angle, 35°to the bar.
7) File from inside towards outside of the tooth only.
8) Sharpen each tooth equally by using the same number of strokes.
9) File at an angle of 90°to the bar.
10) Check the safety depth gauge height after every 5 chain sharpenings.Use
depth gauge measuring instrument to check the height of the depth gauge.

SPECIFICATIONS

SPECIFICATIONS SCS1108
Power
Chain
Bar
Lubrication

WARRANTY

Thank you for investing in a PRO-PULSE power tool. These products have
been made to demanding, high-quality standards and are guaranteed for
domestic use against manufacturing faults for a period of 12 months from the
date of purchase.
This guarantee does not affect your statutory rights. In case of any
malfunction of your tool (failure, missing part, etc.), please contact one of our
service technicians at our toll free service line at 1-888-874-8661 from 8 AM to
6 PM, Monday to Friday, Eastern time. RONA reserves the right to repair or
replace the defective tool, at its discretion.
Normal wear and tear, including accessory wear, is not covered under
guarantee. The product is guaranteed for 12 months if used for normal trade
purposes. Any guarantee is invalid if the product has been overloaded or
subject to neglect, improper use or an attempted repair other than by an
authorized agent. Heavy-duty, daily professional or hire usage are not
guaranteed. Due to continuous product improvement, we reserve the right to
change the product specification without prior notice.
120V/60Hz, 8A
91P053X or 91PJ053X
140SDEA095 or 140SCEA095
Auto
29