Operations
06 Water Filter
indicator
(applicable
models only)
07 Buttons
NOTE
• The control panel is designed to stay off when the refrigerator is not in use. It only
becomes active and lights up when you open the door or tap the buttons.
• If the door is left open for 5 minutes, internal light will blink for 5 minutes and turn
off. This is to alert hearing-impaired users that a door is open. Note that this function is
normal.
Setting the desired temperature or function
1. Tap any button ( ,
- This step may not apply to some models.
2. Tap
to select the fridge or freezer.
- The selected compartment's indicator blinks.
- The degrees Celsius symbol (°C) does not blink.
3. Tap
or
to select the desired temperature or function.
- Refer to the table for available selection for each compartment.
Fridge
46
English
Untitled-5 46
•
indicates that the water filter needs to be replaced.
• When see the
reset the water filter replace alarm, or dismiss the alarm
and change the filter later. (For more information, see the
"Resetting or dismissing the water filter replacement alarm
(applicable models only)" section on page 48.
• When the display is off, tap any button to wake up the
display.
• Use
to select the fridge or freezer and
the desired temperature or function for the selected
compartment.
, or
) to wake up the display.
• Available selection:
6 °C 7 °C
(Vacation)
• Power Cool speeds up the cooling process at maximum fan speed. The
fridge keeps running at full speed for two and a half hours and then
returns to the previous temperature.
• Use the Vacation function if you are going on vacation or a business
trip, or if you do not intend to use the fridge for an extended time. The
fridge temperature will be kept under 15 °C, but the freezer remains
active as previously set.
icon, you can replace the water filter and
(Power Cool) 1 °C 2 °C 3 °C 4 °C 5 °C
or
to select
2023-04-05
11:00:44