Samsung RS6GC Serie Manuel D'utilisation page 32

Installation
STEP 5 Adjust the door height as well as the door gap
To adjust the height of a door
The height of a door can be adjusted using the clamp nut and the height nut on the front
bottom of each door.
32 English
Untitled-5 32
1. Open the door to adjust, and locate the
B
A
2. With a 19 mm spanner (provided),
A
3. When complete, tighten the clamp nut
A
two nuts (A) and (B) on the front bottom
of the door.
turn the clamp nut (A) clockwise to
loosen. Then, open the door, and do the
following inside the door.
- To raise the door, turn the height nut
(B) counter clockwise.
- To lower the door, turn the height
nut (B) clockwise.
(A) by turning it counter clockwise.
2023-04-05 11:00:38