Maxvac Dustblocker 650 Instructions D'utilisation Et D'entretien page 6

TROUBLESHOOTING
Problems Causes
The blower does not No power
function.
Defective power cord.
Defective switches
The blower stops Problem with power
immediately. supply
Red signal LED lights Filter blocked
The device blows out Filter defect or
dust loose
Abnormal noise
10
DB 650
Solutions
Check that the power
socket is working
Replace Cable
Contact your technical
service centre
Check whether cable
is installed properly.
Check if there is
voltage at the socket.
Replace the filter
Adjust or replace filter
Have the device
checked
MAX-VAC.COM
WARRANTY
MAXVAC devices and accessories are supplied with a 24 month warranty on
material and manufacturing defects. Keep (the copy of) your receipt in order to be
able to submit the correct purchase date, if necessary.
Never try to repair the Dustblocker yourself without prior approval from the
manufacturer.
The warranty does not include defects that result from normal wear, negligence,
incorrect use, repairs without permission and defects caused by connecting the
Dustblocker to the wrong mains voltage.
EU - DECLARATION OF CONFORMITY
Complies with machinery directive 89/392 plus annexes.
Dust collectors of the Dustblocker type.
Models: Dustblocker 650.
MAXVAC hereby declares that the above-mentioned products have been
manufactured fully in compliance with the following EU legislation:
Machinery directive:
2006/95/EC (LVD) and 2004/108/EC (EMC)
EMC directive:
EN 55014-1: 2006 + A1:2013
Low Voltage directive:
EN 60335-2-65:2003 + A1:2008
Manufacturer: MAXVAC, Zürich, Schweiz.
Date: 2nd September 2021.
DB 650 MAX-VAC.COM 11