Télécharger Imprimer la page

Maxvac Dustblocker 650 Instructions D'utilisation Et D'entretien page 4

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 16
CAUTION
These instructions are intended for the MAXVAC Dustblocker 650.
Dustblockers can only be used for filtering dry, non-explosive dust.
Dustblockers cannot be used in moist rooms or rooms where an explosion
hazard may exist.
MAXVAC cannot be held liable if the Dustblocker is used for other applications or
if the Dustblocker is not used in accordance with this manual.
GENERAL
When removing the packaging, please check whether the Dustblocker 650 has
been damaged during transport.
Damaged cables that have been bent or torn, can be dangerous during use
of the device and must be replaced immediately in order to prevent personal
injuries.
In order to prevent personal injuries and property damages you must place the
device on a sturdy foundation, so that the Dustblocker 650 cannot fall over.
Make sure your fingers do not get stuck when opening and closing the machine.
In order to prevent a risk of explosion, you should not place the device in a room
that may contain explosive gasses.
6
DB 650
MAX-VAC.COM
Switch the unit to the off position (0) before removing the plug from the socket.
If the switch is on sparks may be generated between the socket and the plug of
the device.
Prior to performing maintenance, first remove the plug from the socket in order
to prevent electrical shock.
When replacing the pre filters or hepafilter it is possible that dust is dispersed
that can be dangerous for people's health. Therefore, users should wear safety
glasses, safety gloves and a respiration mask that comply with protection class
FFP3.
Do not drill through or break open the HEPA filter.
OPERATION
The operating panel is at the side of
the Dustblocker and is identical for all
models.
From left to right:
Red switch (position I-O)
(1)
Red led (gives a signal if the filter has
(2)
to be replaced)
Variable speed control
(3)
Connection for outlet duct (optional)
(4)
Connect the plug to the socket on
(5)
the back of the machine to start
the device.
DB 650
1
2
3
4
5
MAX-VAC.COM
7

Publicité

loading

Produits Connexes pour Maxvac Dustblocker 650

Ce manuel est également adapté pour:

Db 650