Pioneer PRS-A700 Mode D'emploi page 10

Connecting the Unit
Connecting the Speakers and Input Wires
The speaker output mode can be four-channel, three-channel (stereo +
mono) or two-channel (stereo, mono). Connect the speaker leads to suit the
mode according to the figures shown below.
Four-channel mode
From car stereo (RCA output)
If only one input plug is used, such
as when the car stereo has only one
output (RCA output), connect the
plug to RCA input jack A, but do
not connect a plug to RCA input
jack B.
Three-channel mode
From car stereo (RCA output)
If only one input plug is used,
such as when the car stereo has
only one output (RCA output),
connect the plug to RCA input
jack A, but do not connect a
plug to RCA input jack B.
9
All manuals and user guides at all-guides.com
RCA input jack A
RCA input jack B
RCA input jack A
RCA input jack B
Input Select Switch
For two-channel input, slide this switch to the left.
For four-channel input, slide this switch to the right.
Connecting wires with RCA plugs
(sold separately)
(Right)
Speaker out A
(Left)
(Left)
Speaker out B
(Right)
Input Select Switch
For two-channel input, slide this switch to the left.
For four-channel input, slide this switch to the right.
Connecting wires with RCA plugs
(sold separately)
(Right)
Speaker out A
(Left)
Speaker out B
(Mono)