Aiwa CT-Z110 YU Mode D'emploi page 13

SETTING THE BEEP TONE
The unit is preset at the factory to beep each time
you press any button on the front panel except z,
REW, or FF (no beep with the Jog Dial). You can
mute this beeping by following the procedure
below.
1
With the unit off, press and hold SEL for
more than 2 seconds.
The "BEEP" indication appears.
2
Rotate the Jog Dial to select on or off.
The beep function is activated when the
"BEEP" indication appears with the beep on/
off indicator lit, and canceled when not
displayed.
Beep on/off indicator
3
Press and hold SEL for more than 2
seconds.
The unit turns off.
MAINTENANCE
Cleaning the front panel
When the front panel is soiled, wipe the surface
with a soft, dry cloth.
Cleaning the tape head
Use a cleaning cassette to clean the playback
head and capstans approximately once a month.
If the head is dirty, the high tones may not be
reproduced properly.
CTZ110(YU)-total-En-13
12
ENGLISH