Philips GC9610/20 Mode D'emploi page 7

All manuals and user guides at all-guidesbox.com
Putting down the iron during ironing
- During ironing, you can place the iron either on the iron
platform or horizontally on the ironing board. Thanks to the
OptimalTEMP technology, the soleplate will not damage
the ironing board cover.
Energy saving
ECO mode
- By using the ECO mode (reduced amount of steam), you
can save energy without compromising on the ironing result.
The green light is on.
-
You can deactivate the ECO mode by pressing the ECO
button. The green light goes off.
Safety auto-off mode
- To save energy, the appliance switches off automatically
when it has not been used for 10 minutes. The auto-off light
in the on/off button starts to flash.
-
To activate the appliance again, press the on/off button.
The appliance then starts to heat up again.
Note: The appliance is not switched off completely when it
is in safety auto-off mode. To switch off the appliance, press
the on/off button.
Turbo steam
For faster ironing and a higher amount of steam, you can use
Turbo steam.
1 Press and hold the on/off button for 2 seconds until the
light turns white.
2 To deactivate Turbo steam, press and hold the on/off
button again for 2 seconds until the white light turns blue
ENGLISH
9