Velleman ED610D2 Mode D'emploi page 2

To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that
disposal of the device after its lifecycle could harm the
environment. Do not dispose of the unit (or batteries) as
unsorted municipal waste; it should be taken to a
specialized company for recycling. This device should be
returned to your distributor or to a local recycling service. Respect
the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Velleman! Please read the manual thoroughly
before bringing this device into service. If the device was damaged in
transit, don't install or use it and contact your dealer.
Safety instructions
 A qualified technician should install and service this device.
 The measurements provided by this device are for information
purposes only.
Description
Refer to the illustrations on page 1 of this manual.
This single phase DIN rail kWh meter is a new generation of single
phase electronic watt-hour meters, adopting micro-electronic
techniques, LSI circuits and advanced digital and SMT techniques.
The meter is in conformity with the relevant technical requirements
of Class 1, Class 2 and IEC62052-11, IEC62053-21. It accurately and
directly measures 50/60Hz active energy consumption from single
phase AC electricity net.
Features
 LCD display (with blue backlight)
 pulse output
 LED indicator
Reset
To reset the device, keep your finger on the infrared eye (marked
Reset) for 3 to 12 seconds.
V. 05 – 10/06/2013
EMDIN02
ENGLISH
2 ©Velleman nv