Publicité
Les langues disponibles
Les langues disponibles
6. To oscillate (swing) the heater through approximately
60 degrees, press the OSCILLATING button (12). The oscillating
indicator light next to the
7.
To stop the swing while the appliance is oscillating, wait
until the airflow is in the desired position and press the
OSCILLATING button (12). The oscillating indicator light next to
the
symbol will turn off.
8. To turn off the heater:
•
Press the ON/OFF button (8) and the indicator light will
change from orange to red.
Press the main POWER switch (5) to the off position O.
•
•
Unplug the heater from the mains power supply.
NOTE:
•
Do not cover the heater or the air outlets/vents at any time
while it is turned on. There is a risk of fire if the heater is
covered.
•
For safety reasons, this heater is equipped with a tip-over
sensor. This sensor automatically shuts down the heating
element if the heater is not in an upright position while in
operation. To resume normal operation, check the heater is cool
enough to handle. Turn it upright again and it will continue to
work.
•
The fan will continue to run 30 seconds after the appliance is
turned off to cool down the unit.
HOW TO USE
symbol will turn on.
EN
11
Publicité
