Publicité
Les langues disponibles
Les langues disponibles
Changing the temperature
When the panel is unlocked, press the ② button repeatedly to set the corresponding temperature.
Caution! The temperature shown on the display is the set temperature and not the temperature inside
the compartment. The temperature will reach the set value after a set period of time.
The specific temperature change is cyclic as shown in the figure below:
Depending on the temperature setting, the freezer can also be used as a refrigerator.
Changing the temperature unit from °F/°C and vice-versa
Press and hold the ② button for 3 seconds to change the unit of the displayed temperature.
Super freeze mode
Press the ① key to activate or deactivate the quick freeze mode, the display screen will then show
the ❆ icon. The temperature inside the compartment will be reduced to -30°C / -22°F. The quick
freeze mode is deactivated automatically after 24 hours. Once this time has elapsed, the temperature
returns to the previous setting. A power failure will also cause this mode to be switched off.
High temperature alarm
The symbol ⚠ appears on the display, if the temperature inside the compartment is too high.
Error codes
If the symbol E2 appears on the display, the temperature sensor is damaged. In this case, contact the
technical service.
Caution! Thawed food should not be put back in the freezer
and should be eaten immediately.
Switching off the appliance
To turn off the appliance completely, pull the plug from the socket.
Ice cubes
This appliance can be equipped with one or more ice cube trays for making ice cubes.
Publicité
