Publicité
Les langues disponibles
Les langues disponibles
Switching on/ off the alarm
1.
To switch the alarm on, press the SELECT-INFO button and hold for 2 seconds. The alarm icon will be shown at the top left
corner.
2. To switch the alarm off, press the SELECT-INFO button again and hold for 2 seconds. The alarm icon will be disappear.
3. To turn off the alarm when it buzzes, simply press the On/Off button.
VOLUME & SOUND
To adjust the volume, simply press the Volume – or + buttons when playing the DAB / FM radio / AUX IN mode.
The level of volume (from 00 to 40 the loudest) will be shown on the LCD Display.
Note: When playing on batteries; if the energy level of the batteries is too low, sound will distort on higher volume.
360 DEGREES SOUND
The unique Neodymium speaker located on top of the radio provides a 360 degrees sound image.
Suggestion: If preferred, place the radio in a corner or close to a wall for additional sound reflection.
TONE
The TONE function enables the user to adjust the lower and higher sound frequencies.
1.
Press the On/Off button to switch on the radio.
2.
Press the TONE/SELECT-INFO button for about 3 seconds, the display shows "BASS 0"
3.
Press Volume – or + buttons to set the desire Bass level.
4.
Press the TONE/SELECT-INFO button to confirm, then "TREBLE 0" displayed.
5.
Press Volume – or + buttons to set the desire Treble level.
6.
Press the TONE/SELECT-INFO button to confirm, and display returned to normal.
17
LANGUAGE SETTING
The menu of the radio can be configured to various languages.
1.
Press the On/Off button to switch on the radio.
2.
Press the MENU button, and then the TUNING ◄◄ or ►► buttons until the display shows "System".
3.
Press the SELECT-INFO button; then the TUNING ◄◄ or ►► buttons until the display shows "Language".
Press the SELECT-INFO button; then the TUNING ◄◄ or ►► button until the desired language appears on the display
4.
(default is English).
5.
Press the SELECT-INFO button to confirm your choice.
6.
The display menu will then change to the chosen language.
SOFTWARE VERSION
The software display cannot be altered and is just for your reference. You can only view the software version in DAB and FM mode.
1.
Press the On/Off button to switch on the radio.
2.
Press the SOURCE button to select FM or DAB mode.
3.
Press the MENU button, and then TUNING ◄◄ or ►► button until the display shows "System".
4.
Press the SELECT-INFO button; then the TUNING ◄◄ or ►► button until the display shows "SW Version".
5.
Press the SELECT-INFO button to view the software version.
6.
Press the MENU button to return to the normal radio display.
Note: USB socket next to the battery compartment is for upgrading the software of the device if needed.
Software upgrade should be done by qualified service personnel.
GB
GB
18
Publicité
