Amazon Basics B006TWSUJ6 Consignes D'utilisation page 4

OPERATION
LED STATUS INDICATORS
Power On
(green light)
ShredSafe™ technology is an added safety feature incorporated in this particular
model. It is a new technology where the shredder is able to detect forced entry
and automatically cuts the power off, preventing further shredding.
To begin shredding, locate the switch on the unit and select the "Auto" mode (FIGURE 2). The
Green LED light indicates the shredder is "On" and ready to use. Press the designated "PUSH
OPEN" area on the handle of the cover to tilt open and expose the paper feed slot (FIGURE 3).
The cover will click into a preset position where the "SHREDDER STATUS" indication line
must align with the "READY" setting.
Be sure to NOT tilt the cover completely open beyond the preset position, otherwise the
ShredSafe™ power cut off feature will be activated and the shredder will be inoperable.
The "SHREDDER STATUS" indication line must align with the "READY" setting.
READY:
The shredder is currently on STANDBY and ready to operate when paper is inserted.
With the feed slot now exposed, you can shred sheets of paper or 1 credit card per
pass. The green LED light indicates the shredder is "ON" and ready for use.
DISABLED: The safety feature has been activated. All power to the SHREDDER IS CURRENTLY
SHUT OFF AND WILL NOT OPERATE until the cover is returned to the "READY" setting.
The cover has been completely tilted beyond the safe position.
When shredding is completed, you can press the designated "PUSH CLOSE" area on the cover
to tilt shut the paper feed slot (FIGURE 4). It is recommended to have the paper feed slot closed
when shredder is not in use to prevent any objects from accidentally getting into the feed slot.
CONTINUED NEXT PAGE
4 ENGLISH
Paper Overload
(red light)
Shredder Overheat
(red light)
Shredder Not Aligned
(red light)