Amazon Basics B006TWSUJ6 Consignes D'utilisation page 3

OPERATION
FIGURE 2
Using the switch located on the unit, select one of the following settings by sliding the switch
either left or right (FIGURE 2).
I AUTO / ON:
This setting allows the shredder to be automatically started by inserting paper into the shred
opening. Always feed the paper in as straight as possible. When the paper has passed
through, the shredder will automatically stop (FIGURE 2).
O OFF:
This setting turns off all features of the shredder. For safety reasons, we recommend that
you leave the shredder in the "Off" position whenever the shredder is unattended or not in
use (FIGURE 2).
R REV (REVERSE):
In the unlikely event of a paper jam, the reverse setting can be used to help clear the cutters
of paper that has not passed through. Never attempt to clear a jam by using the reverse
function until you have emptied the wastebasket (FIGURE 2).
FIGURE 3
FIGURE 4
CONTINUED NEXT PAGE
ENGLISH 3