Publicité
Les langues disponibles
Les langues disponibles
Paper Shredder
Operating Instructions
Installation
Operation
Maintenance
Troubleshooting
Warning
* ONE FOLDED SHEET OF PAPER EQUATES TO 2 SHEETS OF PAPER
Heavier paper, humidity or other than rated voltage may reduce shredding capacity.
INSTALLATION
Mount the shredder securely to the rim of the waste basket (FIGURE 1).
A socket-outlet should be near the equipment and be easily accessible.
Connect the power cord to any standard 220-240 volt AC outlet.
This model includes a built-in safety interlock mechanism, which requires the shredder to be
correctly mounted on to the included wastebasket. Located on the back center of the shredder,
next to the power cord, there is a curved flap-like shape that must FIT OVER THE OUTSIDE
matching ridge of the wastebasket (FIGURE1). THE SHREDDER WILL NOT OPERATE UNLESS
IT IS PROPERLY MOUNTED AS PICTURED!
It is not designed to operate with any other wastebaskets. An activation switch located on the
head unit automatically shuts off the shredder when it is lifted or removed. The supplied waste-
basket activates this switch, which allows the shredder to be operable. Lining the wastebasket
with a plastic bag will interfere and may keep the shredder from functioning.
Caution: Crosscut shredders have very sharp exposed blades on the underside.
Use care when mounting the shredder on the wastebasket.
2
ENGLISH
Sheet Capacity
11 sheets of 80 gsm paper*
12 sheets of 70 gsm paper*
Paper Shred Size
Shreds paper into 5.6 x 55 mm pieces
Shreds CDs into 4 pieces at 35 mm wide
Paper Entry Width
220 mm
Credit Card /
Only one per pass
CD Capacity
Duty Cycle
5 min. on / 30 min. off
Voltage
220-240V/50-60Hz 1.2A
FIGURE 1
Publicité
