Teka HE-735 Feuille De Caractéristiques page 9

7 Set the controls to to turn the oven off.
You can consult the end cooking time at any
moment by pressing or until symbol
flashes and then pressing . You can
also modify the end cooking time at this point
by pressing or . The clock beeps twice
to confirm the change.
This function can be used even when you are
already using the oven. To do this, follow the
instructions indicated above except point
number 4.
Setting the Cooking Time and the End
Cooking Time
1 Press or until symbol
up. Press .
2 Select the period of time you wish to cook
for by pressing or .
3 The clock beeps twice, the current time is
displayed and symbol lights up per-
manently.
4 Press or until symbol
up. Press .
5 Select the time you wish the cooking
process to finish at by pressing or
6 The clock beeps twice, the current time is
displayed and symbol lights up per-
manently.
7 Select a cooking function and temperature.
8 The oven remains off with symbols
and lit up. Your oven is set.
16
9 When the time to start cooking is reached,
the oven starts up and cooks for the set
period of time.
10 When the set end cooking time is reached,
the oven turns itself off, the alarm sounds
and symbols and
11 Press any button to stop the alarm and
turn the oven back on again.
12 Set the controls to to turn the oven off.
You can modify the end cooking time by press-
ing or until symbol
then pressing . You can now modify the
end cooking time by pressing
clock beeps twice to confirm the change.
lights
Important
In the event of a power cut, all the electronic
clock settings are deleted and the indication
00:00 flashes on the display. It is necessary
to set the time and programme the clock
again.
lights
.
ATTENTION
Make sure the oven is unplugged before
changing the bulb.
flash.
• Detach the chrome supports by loosening
the screw (A).
A
lights up and
or . The
• Release the bulb-holder glass cover with a
tool.
Changing the oven light bulb
• Change the bulb.
• Reassemble the glass cover and ensure
that everything fits in the correct position.
The replacement bulb must be resistant to
temperatures up to 300 ºC. You can order one
from Technical Service.
17