Télécharger Imprimer la page

AUDIOropa PRO LOOP NX7 Mode D'emploi page 17

Publicité

Les langues disponibles

Les langues disponibles

1. Introduction
Thank you for having purchased the »PRO LOOP NX7« Class D loop driver!
Please take a few moments to read this manual. It will ensure you the best use of the pro-
duct and many years of service.
2. PRO LOOP NX7
2.1 Description
The PRO LOOP NX series consists of Class D loop drivers made to equip rooms with au-
dio support for people with hearing loss.
2.2 Performance range
The »PRO LOOP NX7« belongs to a generation of induction loop drivers with high perfor-
mance and efficiency. With this device it is possible to establish installations according to
the international standard IEC 60118-4.
2.3 Contents of package
Please check if the following pieces are included in the package:
- PRO LOOP NX7 induction loop driver
- Power cable 1.5 m, connectors CEE 7/7 - C13
- 2 pieces 3-point Euroblock-connectors
- 1 piece 2-point Euroblock-connectors, input
- 1 piece Neutrik NL4FX speakON cable socket for loop output
- Mounting screws
- Adhesive loop-indication signs
Should any of these items be missing, please contact your retailer.
English 17

Publicité

loading