SOLIS 7216 Mode D'emploi page 82

O P E R AT I O N
▲
If the water basin is filled to the MAX marking (see point 26 on page 71 of this
manual) with fresh tap water and the appliance is correctly assembled and con-
nected to the power, you can start using it.
1 . S W I T C H I N G T H E A P P L I A N C E O N
Touch the "power" button to switch the appliance on. The current humidity will
illuminate in the control panel, also "CURRENT HUMIDITY" and "LOW" for low
humidity, "LOW + MID" for intermediate humidity or "LOW, MID + HIGH" for
high humidity.
2 . C H O O S I N G F U N C T I O N S
Choose the desired functions. Set humidification power with the "speed" but-
ton. If you wish, activate the ion, night and light functions. If needed, set the
operation time with the "timer" button. The child safety mode can also be acti-
vated.
• In general: The higher the room temperature is, the faster the humidification will
be.
• NOTE: Should you lift the appliance top and separate it from the water basin,
the appliance will automatically stop. Only after the appliance top has been prop-
erly replaced on the water-filled water basin the appliance will reactivate.
• The appliance will also switch off if the water basin is no longer filled with enough
water. In this case, the display (5) illuminates and the appliance switches off.
Before refilling the appliance with water, please always switch the appliance off
•
with the "power" button (16) and pull the power plug from the power socket
resp. the connection adapter from the appliance jack first. Then, use both
hands to lift off the appliance top. Fresh tap water can now be refilled. Please
make sure that the water level does not exceed the MAX marking (see point 26
on page 71 of this manual).
82