Publicité
Les langues disponibles
Les langues disponibles
~ SPECIFICATIONS
Notes on the disc magazine
Be sure to align the edge of the disc to both
grooves of the disc tray when you set the disc.
If a disc is not set properly,
it may cause
damage to the unit,
Disc magazine
Disc tray
Thedisctraymay
betakenoff from the magazine
if you pull the tray forcibly. If the tray was taken
off, push it into the magazine while pressing the
part @as illustrated.
Be sure that both ends of
the tray are aligned
to the grooves
of the
magazine correctly.
'T
Disc
magazine
DISCtray
Compact disc changer
System
Compact
disc digital audio
system
Frequency response
5 Hz – 20 kHz
Wow and flutter
Below measurable limit
Signal to noise ratio
91 dB or more
outputs
Line output (for changer
connector only)
Operating temperature
-10
"c
to 55
"c
Dimensions
225 x63x
175 mm (w/h/d)
(8 7/sx21/2
x 7
in.)
Weight
1,7 kg
(3.74 Ibs.)
Power requirement
12 V DC car bettery
(negative ground)
DIA converter
1 bit DAC, 8 times over
sampling
Sampling rate
44.1 kHz
Disc size
120 mm
Supplied accessories
Disc magazine (1)
Mounting kit (1 set)
Connecting cable (5 m)
(16.4 ft.) (1)
Design and specifications are subject to change without
notice.
ENGLISH
10
Publicité
