Changing The Paper Roll; Replacing The Ribbon; Cleaning; Disposal - Mettler Toledo RS-P26 Mode D'emploi

RS-P26 Printer
10

6.1 Changing the paper roll

Insertion of a new roll of paper is described in section 2.4. See section 8 (Consumables) for the
paper roll's order number.
Note: You may obtain the paper rotary axis from the old paper roll.

6.2 Replacing the ribbon

6.3 Cleaning

Since the printer housing is made of top grade, resistant materials, all commercially available mild
cleaning agents may be used (see safety precautions in section 2.1).

6.4 Disposal

2
1
4 3
In conformance with the European Directive 2002/96/EC on Waste
Electrical and Electronic Equipment (WEEE) this device may not be
disposed of in domestic waste. This also applies to countries outside
the EU, per their specific requirements. Please dispose of this product
in accordance with local regulations at the collecting point specified
for electrical and electronic equipment.
If you have any questions, please contact the responsible authority or
the distributor from which you purchased this device.
If this device is passed on to other parties (for private or professional
use), compliance with this regulation will be required as well.
Thank you for your contribution to environmental protection.
• Remove the paper cover (1).
• Pull paper out of printing unit (2).
• To remove the ribbon cartridge, press in
direction of arrow (3).
• Insert the new ribbon, and if necessary,
take up slack with tensioning wheel (4).
See section 8 (Consumables) for the ribbon
cartridge order number.
• Insertion of a new roll of paper is described in
section 2.4.