Würth 0702 557 X Traduction Des Instructions De Service D'origine page 12

If the application tool should become blocked,
switch the machine off. Loosen the application
tool.
Before switching on the power tool, make sure
that the application tool moves freely. When
switching on with a blocked drilling tool, high torque reac-
tion can occur.
To save energy, only switch the power tool on when using
it.
Always wait until the machine has come to a
complete stop before placing it down. The tool
insert can jam and lead to loss of control over the power
tool.
Restarting Protection
In chiselling mode, the restarting protection prevents
uncontrolled starting of the machine after a power failure.
• To restart the operation, switch the On/Off switch to
the Off position and start the machine again.
Vibration Damper (BMH 45-XE)
The integrated vibration damper reduces occurring
vibrations.
Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Products sold in AUS and NZ only: Use a residual cur-
rent device (RCD) with a rated residual current of 30 mA or
less.
Symbols
The following symbols are important for reading and under-
standing the operating instructions. Please take note of the
symbols and their meaning. The correct interpretation of the
symbols will help you to use the machine in a better and safer
manner.
Symbol Meaning
BMH 45-XE:
Rotary and demolition hammer
Grey-marked area: Handle
(insulated gripping surface)
Symbol Meaning
Art. No.
Read all safety warnings and all
instructions
Before any work on the machine itself,
pull the mains plug from the socket
outlet
Wear protective gloves
Always wear ear protection.
Wear safety glasses/goggles
Movement direction
Reaction direction
Next step of action
Prohibited action
Hammer Drilling
Chiselling
Vario-Lock
Switching On
Switching Off
On/Off switch lock-on
Releasing the On/Off switch
12