ANK H10-20-220-135 Manuel De L'utilisateur page 19

REPLACING OVEN LAMP
WARNING: To avoid electric shock, ensure that the appliance circuit is
open before changing the lamp. (having circuit open means power is off)
First disconnect the power of appliance and ensure that appliance is cold.
Remove the glass protection by turning as indicated in the figure on
the left side. If you have difficulty in turning, then using plastic gloves
will help you in turning.
Then remove the lamp by turning, install the new lamp with same
specifications.
Reinstall glass protection, plug the power cable of appliance into electrical
socket and complete replacement. Now you can use your oven.
Type G9 Lamp Assembly:
CLEANING OVEN GLASS
Lift by pressing on plastic latches on left and right side as shown in
Figure 13 and pulling the profile toward yourself as in Figure 14. Glass
is released after profile is removed as shown in Figure 15. Remove the
released glass by pulling toward yourself carefully. Outer glass is fixed
to oven door profile. You can perform glass cleaning easily after glasses
are released. You can mount glasses back by performing the operations
reversely after cleaning and maintenance are completed. Ensure that
profile is seated properly in place.
Figure 13
220-240 V, AC
15-25 W
Figure 11
GB
Type E14 Lamp Assembly:
Figure 14
19
220-240 V, AC
15 W
Figure 12
Figure 15