Publicité
Les langues disponibles
Les langues disponibles
ACCESSORIES
Energy label
FR/ENG manual
Egg tray
Left fridge door stop
ENERGY-SAVING TIPS
Install the fridge or freezer in a cool place out of direct sunlight and away from cookers,
heaters, dishwashers or any hot air emitting items.
Do not set the fridge and freezer temperatures lower than necessary. Set the internal
temperature within the correct range e.g. adjust the thermostat at middle position for 4°C
in the fridge compartment and -18°C in the freezer respectively.
Let pre-cooked foods cool down before placing them in the fridge or freezer. This will
prevent the internal temperature of the fridge from rising.
Keep your fridge full, but not over crowded, this helps reduce "cold" air loss. Meanwhile,
avoid overloading the fridge or freezer. Try to leave about 20% free space for air circulation.
To prevent cold air escaping, limit the frequency of opening door. When retuning from
shopping, sort foods to be kept in your fridge before opening the door. Only open the door
to put food in or take it out.
Make sure the door seal is clean and in good condition. It should hold a piece of paper
tightly in place when shut.
Defrost regularly or when ice is more than 5mm thick. Thick ice covering the inner sides
significantly increases energy use.
The combination of the drawers, baskets and shelves shown in the device description is
optimal for efficient energy savings. Changing the combination proposition could alter the
efficiency.
Publicité
