Publicité
Les langues disponibles
Les langues disponibles
To simplify cleaning the interior of the oven, the door can be removed.
o
The process of removing the door is shown below:
o
Open the door fully to position "C"
o
Lift the two mobile links "A" of the hinges, until fixing at point "B".
Then close the door to the half-way position.
o
Next, lift the door upwards and remove it, sliding it outwards; hold the
o
door by the side close to the hinges when doing this.
To replace the door, first slide the hinges into their grooves and open the
o
door completely.
Remember to turn the two moving links "B" used to engage the two
o
hinges before closing the door.(Fig.1)
Warning
Take care not to remove the hinge locking system when taking off the
o
door, as the hinge mechanism can spring back suddenly.
Never submerge the door in water for any reason.
o
Cleaning the glass door (Fig.2)
If possible, remove the oven door glass following the manufacture's
o
instructions. Use warm water with a little detergent to clean the glass
sections of the door.
Do not use abrasive products which could damage the glass. Remember
o
that if the surface of the glass panel becomes scratched, it could cause a
dangerous failure.
To simplify the cleaning, the inner glass panel can be taken out of the
o
door. The method for removing the glass from the door is shown below.
FIG.1
EN-26
Publicité
