Landxcape LX 838i Mode D'emploi page 10

cables.
k) Always switch off robotic lawnmower when
you do not intend to use the mower. Robotic
lawnmower can only start when the power key is
switched on and the correct PIN code has been
entered.
l) Keep your hands and feet away from the rotating
blades. Never place your hands or feet close to
or under the body when robotic lawnmower is in
operation.
m) To avoid using the machine and its peripherals in
bad weather conditions especially when there is
a risk of lightning.
n) Not to touch moving hazardous parts before
these have come to a complete stop.
o) For machines used in public areas, that warning
signs shall be placed around the working area of
the machine. They shall show the substance of
the following text:
WARNING! Automatic lawnmower! Keep away
from the machine! Supervise children!
p) To avoid the risk of injury, please stop the mower
and carry out the mower to another lawn to
be mowed. Never drag or pull the mower on
operation when you change the lawn to be
mowed.
2. ADDITIONALLY WHEN THE APPLIANCE IS
OPERATING AUTOMATICALLY
a) Do not leave the machine to operate unattended
if you know that there are pets, children or
people in the vicinity.
MAINTENANCE AND STORAGE
When the mower is turned upside down
the power key must always be switched
off.
The power key should be switched off during
all work on the mower's underframe, such as
cleaning or replacing the blades.
a) Keep all nuts, bolts and screws tight to be sure
the appliance is in safe working condition.
b) Inspect the robotic lawnmower each week and
replace worn or damaged parts for safety.
c) Check especially that the blades and blade disc
are not damaged. Replace all blades and screws
at the same time if necessary so that the rotating
parts are balanced.
d) Ensure that only replacement cutting means of
10
the right type are used.
e) Ensure that batteries are charged using
the correct charger recommended by the
manufacturer. Incorrect use may result in electric
shock, overheating or leakage of corrosive liquid
from the battery.
f) In the event of leakage of electrolyte flush with
water/neutralizing agent, seek medical help if it
comes into contact with the eyes etc.
g) Servicing of the appliance should be according
to manufacturers' instructions.
Recommendation
To connect the machine and/or its peripherals only
to a supply circuit protected by a residual current
device (RCD ) with a tripping current of not more
than 30 mA.
Residual risks
To avoid injuries, wear protective gloves when
replacing the blades.
Transport
The original packaging should be used when
transporting robotic lawnmower over long distances.
To safely move from or within the working area:
a) Press the STOP button to stop the mower.
You select the four digit PIN code when you start
the mower for the first time.
b) Always switch off robotic lawnmower if you
intend to carry the mower.
c) Carry the mower by the handle at the front under
the mower. Carry the mower with the blade disc
away from the body.
RF exposure requirements
To satisfy RF exposure requirements, a separation
distance of 200mm or more should be maintained
between this device and persons during device
operation.
To ensure compliance, operations at closer than
this distance is not recommended. The antenna
used for this transmitter must not be co-located in
conjunction with any other antenna or transmitter.
This is a class III appliances and it must only be
supplied at safety extra low voltage corresponding
to the marking on the appliance.
EN