Publicité
Les langues disponibles
Les langues disponibles
SOLDERING STATION WITH PROGRAMMABLE TEMPERATURE
This weld machine is an ideal welding tool for an amateur fancier, school, car of electronics, and for
maintaining the service, producing with laboratory.
•
The weld machine is installed with electric soldering iron frame and the sponge for tidying up glue
It is equipped with LCD digital temperature display which can display set temperature and factual
•
temperature simultaneously.
Outer shell construction is tightly and firmly packed, and it has a good function to insulate the aegis.
•
Electronic sensor controlling the temperature
•
Due to the usage of highly electrified components, the heat time supposes to be short.
•
It is installed with 50tile electric soldering irons, and the suitable usage scope is extensive.
•
The electric soldering irons is supposed to work under safe and low electric voltage.
•
•
It has the precise function of regulating temperature, 1 degree or 10 degrees per grade can be
regulated through the temperature regulating button.
•
The regulating scope of temperature is 150°C - 450°C.
•
It is installed with the compensating electric outlet which can protect the intelligent components.
•
When operation breakdown takes place, warnings will appear through screen display and sound.
•
When using the weld machine for the first time, you are required to read the operation instructions
completely and carefully; and in all the welding work, you are supposed to obey the safety rules and
relating regulations.
Diagram explanation
1. LCD digital temperature display
2. With the temperature regulating button, regulating the welding temperature to what it requires
(up+/down- 200°, 300°, 400°)
3. Turn on and turn off the power switch of the welding.
4. The diode plug (180°) with 5 conjunctions is used to combine the hot irons and the welding machine
which are under the control of the sensor.
Note: TIPS N series Long Life from cod. 495236190 to cod. 495236194
The electric soldering irons frame, installed with protective equipment through toughing and sponge trays
which can be drew out.
EN
Publicité
