PNI MAB300LR Manuel Utilisateur page 11

System configuration Normal Closed
Installation dimensions
You can adjust the opening angle of the gate according to the dimensions in
the table below:
The values of columns A, B, C, E and L are expressed in mm.
The values of column D are expressed in degrees.
Control board wiring diagram
Technical parameters:
Power supply voltage of the control unit: 24 V. A 24V backup battery can
»
be installed (not included).
Can work with double gates.
»
Supports up to 120 remote controls.
»
Motor specifications: 24V DC x 2.
»
11 User manual