Publicité
Les langues disponibles
Les langues disponibles
EN
How to set the system time
Press ON/OFF button, when the icon illuminates on window. Press the
button
once, and the hour on the display will flash. Press
or
to adjust the current hour,
and then press the
button to confirm. Then the minute flashes, press
or
to
adjust the current minute, and then press the
button to confirm. Then the weekly
calendar flashes, press
or
to adjust the day of the week, and then press the
button confirm.
How to set the temperature
Press
or
to adjust the temperature, range from 5 to 50 °C, the two digits flash
for a few seconds without any operation, and then return to display room temperature.
When the room temperature is lower than the set temperature of 2 °C, the heating
will automatically start. When the room temperature reaches or is higher than the set
temperature, the heating will automatically stop.
Open window detection
This heater has open window detective function, which is when the heater is power on
(no matter normal mode or week timer mode), it will automatically stop heating if the
detected temperature drops 5 °C (or more) in 5 minutes.
22
Publicité
