Westfalia WS 230/2600 Mode D'emploi page 40

2. To switch off the angle grinder, release the ON/OFF switch.
Soft Start
The angle grinder is equipped with a soft start. When the switch is
operated the the angle grinder will start up slowly to ease the stress
on domestic electric installations and to avoid the sudden jekr of the
machine starting up.
Hints for Operation

When using the angle grinder for cutting, avoit tilting the angle
grinder out of the cutting line. It is advisable to use diamond
discs when cutting hard stone.

For the best results while rough grinding hold the machine
against the surface in an angle between 30° and 40° in smooth,
even movements.

The maximum permitted speed of the disc must be equal to or
higher than the maximum no load speed of the machine. The
maximum permitted speed of the cutting disc is printed on the
disc.

Use only cutting or grinding discs with a maximum permitted
rotation speed of 6600 revolutions per minute.

Never cut materials containing asbestos with this angle grider.
Carbon Brushes
The angle grinder is delivered with a spare set of carbon brushes.
Carbon brushes should only be replaced by a professional. Or
questions please turn to the Westfalia customer service.
Operation
36