Brother PT-D610BT Guide De L'utilisateur page 95

Home > Print Labels
Tape Cutting Options
In the Options table, these visual patterns represent parts of your label, as illustrated in the Example column.
ABC
Setting Description
Small
Automatically cuts a piece of blank tape before
Margin
printing the first label and then cuts the tape after
each label is printed, leaving a 0.08" (2 mm)
margin at both ends of each label.
Large
Automatically cuts the tape after each label is
Margin
printed, leaving a margin of 0.98" (25 mm) on
each end.
Chain
•
•
PAGE 95 OF 464
> Select a Cut Option
Print area
Margin
Laminate margin
Automatically cuts a piece of blank tape
before printing the first label and then cuts the
tape after each label is printed, leaving a
0.08" (2 mm) margin at both ends of each
label.
When the last label is printed, the tape is
neither fed nor cut. Press
simultaneously to feed and cut the tape.
> Tape Cutting Options
Example
• When the label length is approximately 0.9" (23
mm) or more
1. Approximately 0.9" (23 mm)
2. 0.08" (2 mm)
• When the label length is approximately 0.9" (23
mm) or less
1. Approximately 0.9" (23 mm)
2. 0.08" (2 mm)
1
1. Approximately 0.9" (23 mm)
2. 0.08" (2 mm)
and
1. Approximately 0.9" (23 mm)
2. 0.08" (2 mm)
3. Cut Position
H-10159
2 2
ABC ABC
2
1
2
A A
1 2 1
2 2 2
ABC ABC
1 1
2 2
3
ABC ABC
1 2
2
2
1
91
1023 IH-10159VND