Brother PT-D610BT Guide De L'utilisateur page 140
Masquer les pouces
Voir aussi pour PT-D610BT:
- Guide de l'utilisateur (156 pages) ,
- Mode d'emploi (9 pages)
Publicité
Les langues disponibles
Les langues disponibles
Home >
Routine Maintenance
Maintenance
Always remove the batteries and disconnect the AC Adapter before cleaning the Label Maker.
>> Clean the Unit
>> Clean the Print Head
>> Clean the Tape Cutter
Clean the Unit
1. Wipe any dust and marks from the Label Maker using a soft, dry cloth.
2. Use a slightly dampened cloth on difficult to remove marks.
Do not use paint thinner, benzene, alcohol or any other organic solvent. These may deform or damage the
case of your Label Maker.
Clean the Print Head
Streaks or poor quality characters on printed labels generally indicate that the Print Head is dirty.
Clean the Print Head using a cotton swab or the optional Print Head Cleaning Cassette (TZeCL5).
-
Do not touch the Print Head directly with your bare hands.
-
Read and follow the instructions provided with the Print Head Cleaning Cassette.
Clean the Tape Cutter
Tape adhesive can build up on the cutter blade after repeated use, taking the edge off the blade, which may
result in the tape jamming in the cutter.
PAGE 140 OF 464
> Maintenance
H-10159
1023 IH-10159VND
Publicité
