turbionaire THEA 50 Manuel D'instructions page 7

INSTALLATION
Note: When the range hood and appliance supplied with energy other than electricity are
simultaneously in operation, the negative pressure in the room must be not exceed 4 Pa (4 x
10 -5 Bar).
Required minimum distance hood to
Ceramic-glass rings/hotplates
Gas cooker
Coal / oil / stove wood firing
Installation Steps
Note: Do not connect the power cable until the installation is complete! Get a second person
to help you with the installation.
1.Saw an opening in the wall cabinet under which the hood is to be fitted. Use the following
dimensions (mm) as a guide:
HOLE MEASUREMENTS FOR INSTALLATION (mm)
Image 1.
2. Insert the range hood into the cabinet. Please make sure the elastic pins of the both sides
are fixed on the cabinet.
Image 2.
10mm~28mm
500
THEA 50
65 cm
75 cm
85 cm
749
THEA 75
Elastic pin