Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION
1. INSTRUCTION
Unpack the refrigerator and locate at desired location.
Refrigerator should be located properly in ventilated area.
After installing the appliance, connect the power plug into a socket outlet. Before moving and
discarding the appliance, disconnect the plug from the socket outlet.
2. LEVELLING
Levelling of refrigerator should be done with front leg. Refrigerator should be levelled with front to back
inclination for base.
>200mm
Dimensions and Clearances
Too small of a distance from adjacent items may
result in degradation of freezing capability and
increased electricity costs. Allow over 200mm
clearance from each adjacent wall when
installing the appliance.
Images are for representation purpose only
-
G*-051**/G*-031**
A
B
C
D
E
F
G
H
>200mm
>200mm
G*-131**/ G*-141**/ G*-
081**/ LTT33**
440
463
500
812
450
482
0
0
450
482
450
482
850
900
850
900
EARTHING
Use electrical connection
g
with 3-pin for earthing.
Ambient Temperature
The appliance is designed to operate within a
limited range of ambient temperatures,
depending on the climate zone. do not use the
appliance at a temperature exceeding the limit.
The internal temperatures could be affected by
the location of the appliance, the ambient
temperature, the frequency of door opening and
so on.
The climate class can be found on the rating
label.
Climate Class
SN (Extended Temperate) +10 - +32
N (Temperate)
ST (Subtropical)
T (Tropical)
*Australia, India, Kenya
NOTE
The appliances rated from SN to T are intended
to be used at an ambient temperature between
0
0
10 C and 43 C
6
STARTING
Off
DEFROST
Before loading let run refrigerator
g
for 24 hrs. in normal position.
Ambient Temperture
0
Range C
+16 - +32
+16 - +38
+16 - +43/+10 - +43*
Publicité
