Westinghouse QR043LED Manuel De L'utilisateur page 14

Maintenance
REPLACING FILTERS
When filters need replacing, exchange with similar. Also replace
filters that are damaged with punctures, bends, or broken frames.
- Turn off the range hood and disconnect the power .
- Remove the filters (1) by pulling the handles (2).
- Replace with an equivalent filter, then reconnect the power.
REPLACING LIGHT BULBS
When light bulbs burn out, replace them with a 5W GU10 base light
bulb .
- Turn off the range hood, disconnect it from its power
source, and ensure that the lights are cool .
- Turn the bulb (1) in the direction indicated and pull it out to
remove it .
- Push in the new bulb (2) and turn it in the direction
indicated until it locks into the socket . Do not release the
bulb until you are sure the bulb has been securely installed .
Then reconnect the power .
- If new bulbs do not operate, ensure that they are inserted
correctly .
QR043LED
DANGER:
Turn off the power circuit breaker or the power
switch on the junction box before performing maintenance .
Touching circuitry inside the range hood while it is
energized will result in death or serious injury .
Failure to replace worn out or damaged filters
WARNING:
will increase the risk of fire.
A
WARNING:
Light bulbs can become extremely hot when
turned on . Do not touch bulbs until they are switched off
and cooled . Touching hot bulbs could cause serious burns .
14
1
2
1
2