Publicité
Les langues disponibles
Les langues disponibles
Transport protection
Service programme to prevent frost damage
during transportation and storage�
This programme completely empties the
appliance�
● Touch [ Start ] to begin running the
programme�
● Empty the water tank and reinsert�
● If available remove the milk container and
close the door�
The appliance automatically empties all its
pipes�
● Empty the drip tray and re-insert�
Beverage info
Display shows how many drinks have been
prepared since its initial use�
● Touch [ Display ] to show the information�
Factory settings
Resets your own settings to the condition
when delivered�
● Select "Reset" with the rotary selector�
The message "Are you sure?" appears.
● Touch [ Reset ] or [ Cancel ] to either
confirm or interrupt.
Care and daily cleaning
Risk of electric shock!
E
Never immerse the appliance in
water� Do not steam-clean the
appliance�
● Wipe the outside of the appliance with a
soft, damp cloth�
● Clean the display using a micro-fibre
cloth�
● Do not use any cleaning agents
containing alcohol or spirits�
● Do not use abrasive cloths or cleaning
agents�
● Always remove any limescale, residues
of coffee or milk, cleaning or descaling
solution immediately� It is possible for
corrosion to form underneath such
deposits�
F
New sponge cloths may contain
salts� Salts can cause rust film on
stainless steel and must therefore be
washed out thoroughly before use�
● Open the door, pull the drip tray forward
and remove the coffee grounds container�
● Empty, clean and dry them both�
Important: The drip tray and the
F
coffee grounds container should be
emptied and cleaned every day to
prevent the formation of mould�
en
49
Publicité
