Inventum NB560R Mode D'emploi page 10

2
appliance description
NB560R
1. Filler cap
2. Lid
3. Glass blender jug (capacity 1 litre)
4. Control knob with speed settings
5. Base
6. Blade set
1
3
before first use
Before you use the appliance for the first time, please do as follows: Carefully unpack the appliance and remove all the packaging
material. Keep the material (plastic bags and cardboard) out of reach of children. Check the appliance after unpacking for any
damage, possible from transportation. Place the blender on a flat and stable surface. Rinse all the accessories - glass blender jug,
to-go bottle, blade sets and both lids - with warm soapy water and dry them thoroughly. Wipe the base with a damp cloth. Always roll
out the cord completely.
When the blender is in use, the ingredients will be transported along the sides of the jug to the top and will come down through the
middle. This system guarantees that even ice cubes will be completely crushed in the glass blender jug.
• Place the blender on a flat and stable surface as soon as you have rolled out the cord. Practice a few times to disassemble and
assemble the blender without any ingredients.
• The middle of the lid of the glass jug has a cap which can be used as a measuringcup and for adding ingredients. Through the
opening in the lid you can gradually add ingredients.
• The base contains the motor. Because of it's size, the housing is very stable.
• The control knob regulates the speed of the blender. The blender has 2 speeds and a pulse (ice crush) setting.
- setting P = pulse
- setting O = off
- setting 1 = lowest speed
- setting 2 = highest speed
• The blender can crush ice cubes with the pulse setting in the glass blender jug. This means that the blender is only activated when
you turn the knob to the pulse setting. As soon as you let go of the button the blender will be deactivated.
10
• English
7. Lid with drinking spout
8. Bottle (capacity 600 ml)
9. Blade set
2
3
4
5
6
7
8
9