Brandt FC209MUB Manuel D'instruction page 26

Clean all the parts as described in the section "Looking after your machine".
•
Dry all the parts carefully and assemble them. The machine can now be used.
•
Heat the oven empty.
Insert the drip pan and the cooking rack
•
• Adjust the cooking mode selector to
the oven empty for about 10 minutes.
After leaving it to cool unplug and clean the spare parts again.
•
Note:
It is possible that there is a smell of smoke and burning. However, this is normal.
b) Setting the tem perature
c) Setting the cooking duration
Note:
If the inside of the oven is dirty it may be that cooking has taken longer than usual.
and the thermostat to "230°C" and then heat
Adjust the "temperature control" by turning it clockwise to select
the appropriate temperature for the dish you are going to cook
(Temperatures between 100°C and 230°C).
Adjust the timer to the appropriate cooking duration (in minutes)
for the dish you are going to cook by turning it clockwise.
The indicator light enables you to check the heating elements are
functioning correctly. The oven will turn off automatically at the
end of the selected cooking time and an alarm will sound.
You can turn off the oven manually during cooking by turning the
timer anticlockwise to Position "0".
26