Publicité
Les langues disponibles
Les langues disponibles
Installing the Wall Mount Kit
5.
5.
For managing the power cord and other cables for peripheral equipments, bundle the wires by using the supplied wire fixing
tool. Be sure the wires are not unbundled or came off when rotating or operating.
Wall Bracket Angle Adjustment
The SMOOTH MOVING MECHANISM is applied to this product to move the product smoothly for convenience.
Product Specifications
Information in this document is subject to change without notice.
Insert the cables and pull the angle adjust-
ment bracket forward.
Arrange the wires by using the hole to
avoid the interference with wires when
rotating the set. Check the operation 2 ~ 3
times and fix the wall molding if it works
properly.
Do not adjust the angle with force. The product can be damaged if it is
too close to touch the wall. Hold the left and right side of the product
when you want to adjust the left and right angle. Hold the top center to
adjust the up and down angle.
You can adjust the angle to up, down, left, and right side between
20º ~ -20º. The adjustable angle range may vary depending on the
model.
English-87
Product Standards
Width(mm)
Height(mm)
Depth(mm)
Weight(Kg)
Bracket VESA Standard 600 X 400
664,0
460,0
50,0
10,7
Publicité
