Samsung LN40M71BD Mode D'emploi page 17

Operation
Turning the TV On and Off
Plug & Play Feature
When the TV is initially powered on, two basic settings proceed automatically and subsequently:
Press the POWER
button on the remote control.
You can also use the button on the front of the panel.
1
Press the POWER
The message "Menu language, Channels and Time will
be set." is displayed.
Press the ENTER button, then "Select the language of
the OSD" menu is automatically displayed.
2
Press the
then the ENTER button.
We recommend setting the TV to Home mode for the best picture in your
home environment.
Shop mode is only intended for use in retail environments.
If the unit is accidentally set to Shop Mode, press and hold the MENU
button on the side panel of the TV for five seconds to return to Dynamic
(Home) mode.
3
Press the ENTER button to enter the language.
Press the
ENTER button.
"Select the antennas to memorize" menu is automatically
displayed.
4
Press the
the selected connection.
Press the ENTER button to select "Start".
If the antenna is connected to ANT 1(AIR), select "Air" and if it is
connected to ANT 2 (CABLE), select "Cable".
If both ANT 1 (AIR) and ANT 2 (CABLE) are connected, select "Air + Cable".
In Cable mode, you can select the correct signal source among STD,
HRC, and IRC by pressing the
ENTER button.
Contact your local cable company to identify the type of cable system
that exists in your particular area.
English-15
button on the remote control.
or buttons to select "Shop" or "Home",
or button to select language, then the
or button to memorize the channels of
or button, then press the
continued...