Publicité
Steps:
Noted: Most barres are mounted at 106.8cm( 42inch) above the
floor with optional 2nd barre mounted at 81.28cm (32inch)
above the floor. However, you can mount them at a height
that best suits you.
1. Use the electric hand drill to drill 4 holes ( Dia. 12mm ) on the wall
and insert the screws (4 ) as shown in the picture (1).
2. Install the wall bracket on the wall and fix the nuts as like the
picture (2) to make sure the wall bracket is installed firmly.
3. Insert the wood bar into the hole of bracket and fixed by screws (2).
82.7cm ( 32.56Inch )
Drill 4 holes
( Dia 12 mm /0.47inch)
on the wall
06
WARNING
• Please keep the bar away from humid environment to prolong the
life time.
• This equipment must be used with proper mats, spotting
equipment, and qualified spotters for each activity or skill.
• Know your limitations as well as the limitations of your equipment.
Consult a qualified instructor before attempting any new activity or
skill.
• Do not attempt to repair damaged or worn equipment or
components yourself. Contact the manufacturer to arrange for
proper repair or replacement by a qualified professional.
• Test unit for stability prior to each use. Do not use it if you have
any concerns about the stability, condition or suitability of this
equipment.
• Inspect each component for damage, loose fittings or signs of
wear before each use.
• Do not use if you have any concerns as to the condition of this
equipment.
• Use this equipment only for its intended purpose. Do not modify
equipment in any way.
• Before each subsequent use, re-check stability and settings of this
equipment.
• Remember that no equipment can eliminate the possibility of
injuries.
• This equipment is to be used only by properly trained, qualified
persons under supervised conditions. Use without proper
supervision is dangerous and should never be undertaken nor
permitted.
07
Publicité
