SAFETY RULES (CONTINUED)
•
Never pull the cord. Remove it from the electrical outlet/ socket by grasping and pulling on the
plug-end of the cord.
•
This appliance has been manufactured for use in domestic environments and must not be used
for other purposes.
•
DO NOT use in areas where gasoline, paint or other flammable goods and objects are stored.
•
DO NOT operate the unit on COOL setting with an empty tank as this may result in damage to the
water pump.
•
DO NOT attempt to repair or adjust any electrical or mechanical functions of the Air Cooler, as
this may void the warranty.
•
DO NOT cover the cooler's air inlet or outlet, as this may damage the motor.
•
DO NOT insert or allow objects to enter any ventilation or exhaust opening, as this may damage
the unit and may cause electrical shock or fire.
•
DO NOT operate with the Honeycomb Cooling Media removed, as this will overload and damage
the motor.
•
DO NOT leave the operating appliance unattended for an extended period of time.
•
DO NOT operate this unit if it is damaged or malfunctions. Refer to the Troubleshooting section.
If problem still exists contact the Customer Support Center.
•
Always place the unit on a dry level floor.
•
DO NOT use in bathrooms or near water. DO NOT keep the product where it may fall into water or
a water container.
•
Store in a dry area when not in use.
•
Always grip the side handles to move the Air Cooler.
•
WARNING: To reduce the risk of fire or electric shock, do not use this appliance with any solid
state speed control device.
EN
2